Bluetone Vibroverb SRV

 

This amp in mainly based on Fender Vibroverb Combo which became famous by guitarist Stevie Ray Vaughan. Bluetone Vibroverb consists some SRV mods and improvements compared to the original amp. This amp has two individual channels. The other channel has also a spring reverb and vibrato. Power amp has 2x6L6GC tubes giving some 40-50 W output power. You can use all normal octal socket tubes like 6V6GT, 6L6GC, EL34, KT66, KT88/6550 etc. in this amp. In this case output power varies between 20-50 W depending tubes.

Mods and improvements:

- Middle control in both channels

- Vibrato circuit can be switched off by foot switch. This adds gain and distortion from preamp (This is one SRV mod) 

- PPIMV Master Volume with a bypass switch

- 1 ohm resistors in power tubes cathodes making biasing easier

- An external bias point which helps to bias power tubes within minutes with Bluetone Bias Rate meter which can be purchased as an add on tool.

This combo is equipped with a 15″ 150 W/8 ohm Eminence Legend speaker. You can have also some other speaker if needed.

Prices 

With normal tolex and Eminence Legend 1518 speaker 1900 €

 With laquered tweed and Eminence Legend 1518 speaker 2000 €

 With oiled, solid mahogany cabin and Eminence Legend 1518 speaker 2100 €

If you are interested in to have a different speaker or speaker combination, for example 2×12″ version, please ask an offer of it.

Options:

- PPIMV included in normal price

- VVR (Dynamic power scale) to control output power 150 € 

- Buffered tube effect loop with send level and footswitch 100 €

-Line Out 80 €

- Bluetone Bias Rate meter 120 € when purchased with the amp, otherwise 150 €

- Plastic dust cover 40 €

 Prices are subject to change without notice.

 

Sound clips